Craftsmanship creates exquisite products
One-stop service for household production equipment and industrial production equipment
Contact number:
18915560359
Home production equipment
Civil RO Membrane Element Central Tube Cutting Equipment
1. This equipment is suitable for the central tube cutting process of civil RO membrane elements of the 1812 series to 3013 series, and is compatible with hexagonal and bayonet central tubes.
2. The equipment is a household membrane central tube cutting device, using a tungsten steel cutter;
3. The device has centering and pressing on both sides, ensuring a stable cutting process with cutting accuracy of ＜±0.5mm;
4. The product rotation speed is adjustable, and the material holding time is adjustable;
5. C/T ≤ 6S/PCS.
Civil RO Membrane Element Air Testing Machine
1. The equipment is an air testing device for civil RO membrane elements, mainly used for forward and reverse pressure testing of products.
2. Uses negative pressure testing method, parameters: pressure stabilization time and pressure holding can be adjusted;
Civil RO Membrane Semi-Automatic Winding Machine
1. The equipment is a winding machine for civil RO membrane elements.
2. The equipment is suitable for the production of 12-inch and 13-inch household RO membrane series products and is compatible with notched and hexagonal central tubes.
3. The equipment can automatically slice the guiding fabric, apply glue, feed the central tube, and wind the membrane. The machine requires only one person to add materials and supervise the line. Compared with the current mainstream manual production, it achieves the goals of increased output, improved efficiency, and reduced labor.
4. C/T ≤ 20S/PCS, equipment utilization rate ≥ 85%, and the actual hourly output is not less than 150 PCS.
Fully Automatic RO Membrane Element Edge Trimming, O-Ring Installation, Air Testing, and Labeling Machine
1. The equipment is a fully automatic machine for trimming edges, installing O-rings, air testing, and labeling household RO membrane elements. It is suitable for the production of household membrane 1810, 1812, and 3013 series membrane sheets.
2. The equipment can automatically trim membrane element edges, install O-rings, perform air tests, and label, greatly reducing manual labor.
3. Edge trimming and stripping are fully servo-controlled, which significantly improves trimming and stripping precision and meets the center tube cutting function.
4. At the same time, the end face error of the cut is less than 0.5mm, which is also a significant improvement in product quality.
5. C/T ≤ 13S/PCS (1812-75F series products); C/T ≤ 16S (3013-400HR series products), equipment utilization rate ≥ 85%, and hourly output not less than 240 PCS.
Y2403002 - Seal Ring Assembly Equipment
1. The equipment is a household membrane seal ring assembly device, capable of installing two seal rings in two operations;
2. The equipment feeds seal rings via a vibration plate, and the central tube presses the seal rings into place at two workstations;
3. The equipment has a small footprint, is simple to operate, and responds quickly;
4. C/T ≤ 3S/PCS.
RO Membrane Automatic Slitting and Stacking Machine
1. The equipment is an RO membrane automatic slitting and stacking machine, capable of slitting large rolls of membrane and stacking the cut pieces.
2. The equipment is suitable for the production of household membranes of the 1812 and 3013 series.
3. The equipment can fully automatically slit membrane sheets, reducing manual labor.
4. The equipment produces single membrane sheets with C/T ≤ 8S/PCS, equipment utilization rate ≥ 85%, and an hourly output of no less than 382 PCS.
RO Membrane Automatic Cross-Cutting and Folding Machine
1. The equipment can perform fully automatic membrane folding, greatly reducing manual labor.
2. After the membrane sheets and spacers are folded, they are ultrasonically welded, which facilitates subsequent membrane rolling and greatly improves product quality.
3. C/T ≤ 7S/PCS, equipment utilization rate ≥ 85%, with an hourly output of no less than 510 PCS.
4. After the membrane sheets and spacers are folded, they are ultrasonically welded, which facilitates subsequent membrane rolling and greatly improves product quality.
5. C/T ≤ 7S/PCS, equipment utilization rate ≥ 85%, with an hourly output of no less than 510 PCS.
Automatic RO Membrane Cross-Cutting and Winding Machine
1. The equipment is an automatic RO membrane cross-cutting and winding machine, which automatically completes the front-end assembly of RO membranes from raw materials to winding.
2. The equipment is suitable for the production of civilian membranes in the 12-inch series, including membrane cross-cutting, and is compatible with notched and hexagonal central tubes.
3. The equipment can perform fully automatic membrane and spacer cutting, membrane folding, automatic fabric guiding and cutting, automatic gluing, automatic central tube insertion, and automatic winding and material feeding processes. The equipment requires only one person for feeding and line monitoring. Compared with current mainstream manual production, it achieves the goals of increased production, improved efficiency, and reduced labor.
4. C/T ≤ 20S/PCS, equipment utilization rate ≥ 85%, with an actual output of no less than 150 PCS per hour.
RO Membrane Automatic Longitudinal and Transverse Cutting Winding Machine
1. The equipment is a fully automatic assembly machine for household RO membranes, handling the front-end assembly of RO membranes from raw materials to winding.
2. The equipment is suitable for the production of 12-inch household membrane series products, including transverse and longitudinal cutting of membrane sheets, compatible with notched and hexagonal center tubes.
3. The equipment can automatically cut RO membranes and mesh fabric, automatically stack membranes, automatically cut fabric guides, automatically apply glue, automatically feed center tubes, and automatically wind membranes. The equipment only requires one person for material feeding and line monitoring. Combined with current mainstream manual production, it achieves the goals of increased production, improved efficiency, and reduced labor.
4. The short two-page membrane C/T ≤ 16S/PCS, the equipment operation rate ≥ 85%, with an actual hourly output not less than 180 PCS.
Civil RO Membrane Element Automatic Assembly Equipment
1. The equipment is an automatic trimming, inspection, and assembly machine for RO membrane cartridges. It is suitable for the production of 12-inch household membrane series products and is compatible with both notched type and hexagonal type center tubes.
2. The equipment can perform fully automatic feeding, trimming, edge stripping, O-ring installation, water stop ring installation, air inspection, labeling, tape wrapping, and other processes. The equipment requires only one person to feed materials and monitor the line, and when combined with the current mainstream manual production, it can save at least 7 laborers.
3. The equipment cycle time (C/T) ≤ 12 seconds per piece, and the equipment utilization rate ≥ 95%.
Y2309004 - Household RO Membrane O-Ring Fitting, Air Inspection, and Labeling Equipment
1. The equipment realizes automatic O-ring fitting, air inspection, and labeling functions for membrane elements.
2. The equipment is suitable for the production of 1812 and 3013 series household membrane sheets; compatible with hexagonal and bayonet central tubes.
3. The equipment can perform fully automatic feeding, greatly reducing manual labor.
4. Automatic feeding of O-rings and membrane elements improves production efficiency.
5. C/T ≤ 12S/PCS, equipment utilization rate ≥ 85%, with an output of no less than 300 PCS per hour.
Y2403002 - Seal Ring Setting Equipment
1. The equipment is a household membrane seal ring setting device, capable of setting two seal rings twice;
2. The equipment feeds seal rings via a vibration plate, and the central tube sets the seal rings through pressing at two workstations;
3. The equipment occupies little space, is easy to operate, and responds quickly;
4. C/T ≤ 3S/PCS.
Industrial production equipment
Industrial RO Membrane Automatic Roll Packaging and Palletizing Production Line
The Industrial RO Membrane Automatic Roll Packaging and Palletizing Production Line provides a fully automated intelligent manufacturing solution for industrial membrane element production. This production line includes a front-end membrane rolling line, guide cloth and tube cloth welding units, floor-track robots, ambient temperature curing 3D warehouse, integrated cutting and testing machine for the rear section, end cap spin-welding equipment, fiberglass winding equipment, high-temperature curing 3D warehouse, finished product temporary storage 3D warehouse, manual polishing ring unit, finished product packaging and palletizing line, as well as full-line information collection and traceability functional units.
Industrial Membrane Trimming Machine
1. This equipment is suitable for the trimming process of industrial membrane elements of the 8040 and 4040 series products.
2. The equipment uses a servo motor to control the feed stroke and pneumatic clamping. One person is required for loading and unloading.
3. Equipment cycle time is 30~40 seconds per piece (trimming action time, loading, and unloading time not included), with an equipment utilization rate of ≥85%.
Industrial Diaphragm Cutting and Folding Machine
This equipment is suitable for the folding process of industrial diaphragm separator sheets.
The equipment can perform fully automatic ultrasonic side sealing, ultrasonic bottom sealing, tape application, cutting, folding, ultrasonic welding of the diaphragm, and material unloading processes. The equipment requires one operator to monitor the line and replenish materials.
Equipment C/T ≤ 17~22S/PCS, equipment utilization rate ≥ 85%.
Civil RO Membrane Element Air Testing Machine
This equipment is suitable for the welding process of industrial membrane sheets.
The equipment can perform fully automatic feeding, cutting, welding, and unloading processes, and requires 1 person to replenish materials.
The equipment C/T ≤ 130~150S (8040-20 page), equipment utilization rate ≥ 85%.
Y2403001 - Industrial Roll Film Machine
1. The equipment is an industrial film rolling machine, enabling manual-assisted film rolling.
2. The equipment is suitable for the production of 8040 and 4040 series industrial films.
3. The dispensing speed can be set between 10-25 g/s; dispensing volume and ratio accuracy: ±2%.
4. The three-axis dispensing robot can achieve high-speed movement of 1200 mm/s.
5. Bottom layer fabric is fed in full rolls, while the middle layer fabric is welded using handheld ultrasonic welding.
6. Equipment cycle time (C/T) ≤ 8 min/PCS (20 pages), equipment utilization rate ≥ 85%, with an hourly output of no less than 8 PCS.
Fully Automatic RO Membrane Element Edge Trimming, O-Ring Installation, Air Testing, and Labeling Machine
1. The equipment is a fully automatic machine for trimming edges, installing O-rings, air testing, and labeling household RO membrane elements. It is suitable for the production of household membrane 1810, 1812, and 3013 series membrane sheets.
2. The equipment can automatically trim membrane element edges, install O-rings, perform air tests, and label, greatly reducing manual labor.
3. Edge trimming and stripping are fully servo-controlled, which significantly improves trimming and stripping precision and meets the center tube cutting function.
4. At the same time, the end face error of the cut is less than 0.5mm, which is also a significant improvement in product quality.
5. C/T ≤ 13S/PCS (1812-75F series products); C/T ≤ 16S (3013-400HR series products), equipment utilization rate ≥ 85%, and hourly output not less than 240 PCS.
National Service Hotline:
18915560359
13761918645
Email: xiaohan.wang@ntdamai.cn
Address: Huertai Electromechanical Industrial Park, Zhangzhishan, Tongzhou District, Nantong City
Quick Menu
________________________________
Homepage > Product Center > News & Information
For Damai service and support, please contact us.
Scan the QR code to learn more
Mobile Official Website
Copyright © 2025 Nantong Damai Intelligent Manufacturing Technology Co., Ltd. Jiangsu ICP Registration No. 2023010405 Technical Support: Suyuan Network
Copyright © 2021 Nantong Damai Intelligent Manufacturing Technology Co., Ltd. Jiangsu ICP Registration No. 2023010405
Technical Support: Suyuan Network
Mail
